Cover Cable Tray ECT 200mm SV
Variations
Product information
| Cover width : | 200 mm |
|---|---|
| Material thickness : | 1 mm |
| Suitable for cable tray : | Yes |
| Length : | 3000 mm |
| Type of fastening : | Cover clamp |
| Material : | Steel |
| Material quality : | Rustproof and acidproof steel |
| Surface protection : | Continuously galvanised |
| Colour : | Zinc |
Cover ECTC is an accessory for the ECT60 and ECT100 cable tray systems and is used to cover cable trays. The cover protects cables against dust, dirt, and external mechanical impact and contributes to a safe, orderly, and standards-compliant cable installation in industrial and utility environments.
The standard version is manufactured from hot dip galvanized carbon steel according to NEN-EN-ISO 1461, with a minimum zinc coating thickness of 60 µm, suitable for heavy industrial and outdoor environments. The hot dip galvanizing process is applied after fabrication and ensures durable corrosion protection of the surface, including cut edges, in accordance with IEC 61537 and installations compliant with NEN 1010.
The cover is placed on top of the cable tray and secured using the ECTCC cover clamp (not included). This fixing method ensures a stable and vibration-resistant attachment without additional bolted connections. The execution is fully compatible with ECT60 and ECT100 cable trays and associated system components.
Technical Specifications
- Product type: Accessory – cover for cable tray
- System: ECT60 and ECT100
- System width: 75 to 600 mm
- Length: 3000 mm
- Installation: Secured with ECTCC cover clamp (not included)
- Standard material: Carbon steel
- Surface finish: Hot dip galvanized according to NEN-EN-ISO 1461
- Zinc coating thickness: minimum 60 µm
- Standards: IEC 61537, applicable within installations compliant with NEN 1010
Typical Applications
- Covering cable trays in industrial installations
- Protection against dust and mechanical impact
- Installations in heavy industrial and outdoor environments
- Utility and infrastructure cable routes
Available Material Variants
- HDG: Hot dip galvanized carbon steel according to NEN-EN-ISO 1461, with a minimum zinc coating thickness of 60 µm, suitable for heavy industrial and outdoor environments.
- PG: Pre galvanized carbon steel according to EN 10346, suitable for dry indoor environments and light industrial applications.
- Stainless steel 304 (A2 / 1.4301): Stainless steel for indoor environments and lightly corrosive conditions.
- Stainless steel 316 (A4 / 1.4404): Stainless steel with enhanced corrosion resistance for chemical, maritime, and offshore applications.
Complementary Products
For a complete installation within the ECT system, the following components are relevant:
- Cable trays: ECT60 and ECT100 cable trays in various widths
- Cover clamps: ECTCC for securing the cover
- Coupling plates: Standard, horizontal, and vertical coupling plates for ECT systems
These components together ensure a safe, compatible, and maintenance-friendly installation.
Other widths and lengths available on request.
Datasheet_Eurostrut_ECTC60_NL
ECT100_Cable Tray 100mm_Overview
Has accessories
