Cover Flexible Bend Cable Tray ECTFB 75mm RVS316
Variations
Product information
| Angle : | Adaptable |
|---|---|
| Change of direction : | Horizontal |
| Width : | 75 mm |
| Suitable for cable tray : | Yes |
| Type of fastening : | Cover clamp |
| Hinging : | No |
| Material : | Stainless steel |
| Material quality : | Stainless steel 316 (1.4401) |
| Colour : | Stainless steel |
Cover ECTFBC is an accessory for the ECT60 and ECT100 cable tray systems and is used to cover horizontal flexible bends, specifically designed for flexible bends ECTFB60 and ECTFB100. The cover ensures a closed and protected cable route at variable direction changes and prevents the ingress of dust and debris. This accessory is suitable for heavy industrial, utility, and infrastructure installations.
The standard version is manufactured from hot dip galvanized carbon steel according to NEN-EN-ISO 1461, with a minimum zinc coating thickness of 60 µm, suitable for heavy industrial and outdoor environments. The hot dip galvanizing process is applied after fabrication and ensures durable corrosion protection of the surface, including cut edges, in accordance with IEC 61537 and installations compliant with NEN 1010.
The cover is specifically designed for installation on horizontal flexible bends within the ECT system. Fixing is carried out using the ECTCC60 cover clamp (not included), ensuring a stable and vibration-resistant attachment. The execution is fully compatible with the corresponding flexible bends and other system components.
Technical Specifications
- Product type: Accessory – cover for horizontal flexible bend
- System: ECT60 and ECT100
- Compatibility: ECTFB60 and ECTFB100
- System width: 75 to 600 mm
- Installation: Secured with ECTCC60 cover clamp (not included)
- Standard material: Carbon steel
- Surface finish: Hot dip galvanized according to NEN-EN-ISO 1461
- Zinc coating thickness: minimum 60 µm
- Standards: IEC 61537, applicable within installations compliant with NEN 1010
Typical Applications
- Covering horizontal flexible bends in cable tray systems
- Protection of cables at variable direction changes
- Heavy industrial and outdoor installations
- Utility and infrastructure cable routes
Available Material Variants
- HDG: Hot dip galvanized carbon steel according to NEN-EN-ISO 1461, with a minimum zinc coating thickness of 60 µm, suitable for heavy industrial and outdoor environments.
- PG: Pre galvanized carbon steel according to EN 10346, suitable for dry indoor environments and light industrial applications.
- Stainless steel 304 (A2 / 1.4301): Stainless steel for indoor environments and lightly corrosive conditions.
- Stainless steel 316 (A4 / 1.4404): Stainless steel with enhanced corrosion resistance for chemical, maritime, and offshore applications.
Complementary Products
For a complete installation within the ECT system, the following components are relevant:
- Flexible bends: ECTFB60 and ECTFB100 for variable horizontal direction changes
- Cover clamps: ECTCC60 for securing cable tray covers
- Straight cable trays: ECT60 and ECT100 cable trays in various widths
These components together ensure a safe, compatible, and maintenance-friendly installation.
Other widths and angles available on request.
Datasheet_Eurostrut_ECTFBC_EN
ECT100_Cable Tray 100mm_Overview
Has accessories
