Cover Outside Riser 45° Cable Tray ECTOR-45 300mm SV
Variations
Product information
| Angle : | 45° |
|---|---|
| Change of direction : | Vertically rising |
| Width : | 300 mm |
| Suitable for cable tray : | Yes |
| Type of fastening : | Cover clamp |
| Hinging : | No |
| Material : | Steel |
| Surface protection : | Continuously galvanised |
| Colour : | Zinc |
Cover ECTIRC45 is an accessory for the ECT60 and ECT100 cable tray systems and is used to cover inside risers with a 45° angle, specifically designed for the inside risers ECTIR60-45 and ECTIR100-45. The cover ensures a closed and protected cable route at vertical direction changes and prevents the ingress of dust and debris. This accessory is suitable for heavy industrial, utility, and infrastructure installations.
The standard version is manufactured from hot dip galvanized carbon steel according to NEN-EN-ISO 1461, with a minimum zinc coating thickness of 60 µm, suitable for heavy industrial and outdoor environments. The hot dip galvanizing process is applied after fabrication and ensures durable corrosion protection of the surface, including cut edges, in accordance with IEC 61537 and installations compliant with NEN 1010.
The cover is specifically designed for installation on 45° inside risers within the ECT system. Fixing is carried out using the ECTCC cover clamp (not included), ensuring a stable and vibration-resistant attachment. The execution is fully compatible with the corresponding inside risers and other system components.
Technical Specifications
- Product type: Accessory – cover for 45° inside riser
- System: ECT60 and ECT100
- Compatibility: ECTIR60-45 and ECTIR100-45
- System width: 75 to 600 mm
- Installation: Secured with ECTCC cover clamp (not included)
- Standard material: Carbon steel
- Surface finish: Hot dip galvanized according to NEN-EN-ISO 1461
- Zinc coating thickness: minimum 60 µm
- Standards: IEC 61537, applicable within installations compliant with NEN 1010
Typical Applications
- Covering inside risers in cable tray systems
- Protection of cables at vertical direction changes
- Heavy industrial and outdoor installations
- Utility and infrastructure cable routes
Available Material Variants
- HDG: Hot dip galvanized carbon steel according to NEN-EN-ISO 1461, with a minimum zinc coating thickness of 60 µm, suitable for heavy industrial and outdoor environments.
- PG: Pre galvanized carbon steel according to EN 10346, suitable for dry indoor environments and light industrial applications.
- Stainless steel 304 (A2 / 1.4301): Stainless steel for indoor environments and lightly corrosive conditions.
- Stainless steel 316 (A4 / 1.4404): Stainless steel with enhanced corrosion resistance for chemical, maritime, and offshore applications.
Complementary Products
For a complete installation within the ECT system, the following components are relevant:
- Inside risers: ECTIR60-45 and ECTIR100-45
- Cover clamps: ECTCC for securing cable tray covers
- Straight cable trays: ECT60 and ECT100 cable trays in various widths
These components together ensure a safe, compatible, and maintenance-friendly installation.
Other widths and angles available on request.
ECTIRC-45_Cover Inside Riser 45 SAT
ECT100_Cable Tray 100mm_Overview
Has accessories
