Equal Tee Cable Ladder ECL60 400mm HDG
Want to view our prices?
Our pricing is exclusively available to registered customers.
Variations
Product information
| Type of side joist : | Profile (open) |
|---|---|
| Type of rung : | Perforated profile |
| Suitable for cable ladder height : | 60 mm |
| Suitable for cable ladder width : | 400 mm |
| Symmetrical model : | Yes |
| Inner radius : | 300 mm |
| Model : | Included connector |
| Material : | Steel |
| Material quality : | Other |
| Surface protection : | Hot-dip galvanised |
| Colour : | Zinc |
Equal tee piece for cable ladder ECL60, H = 60 mm, W = 400 mm, E (thickness) = 3,0 mm, R = 300, Hot Dip Galvanized Carbon Steel, layer 60 to 70µm, including 6x ESL-SB-H Eurostrut fixing set (square neck bolt M10x20, nut and washer). Heavy Duty.
Equal tee EET60 is a fitting for the ECL60 cable ladder system and is designed to create a 90° branch within cable routes. The equal tee enables an even distribution of cable routes by combining the main cable run with a perpendicular branch. The fitting is suitable for commercial, industrial, and infrastructure installations and integrates seamlessly with straight ECL60 cable ladders.
The standard version is manufactured from hot dip galvanized carbon steel according to NEN-EN-ISO 1461, with a zinc coating thickness of 60 to 70 µm. Hot dip galvanizing is applied after fabrication, providing complete corrosion protection for all surfaces, welded joints, and cut edges. The equal tee is also available in stainless steel AISI 304 (1.4301) and AISI 316L (1.4404) for corrosive or hygienic environments. A RAL powder-coated finish is available on request.
The equal tee features a standard branch angle of 90° with a radius of 300 mm and is manufactured from 3 mm steel to provide high structural strength. The fitting is equipped with integrated connectors and is supplied including 6x ESL-SB M10x20 fixing set (carriage bolt M10x20, nut, and washer), enabling fast, secure, and accurately aligned installation. It is fully compatible with all ECL60 cable ladders, couplers, and other ECL60 system components.
Technical Specifications
- Product type: Equal tee for cable ladder
- System: ECL60
- Actual height: 54 mm
- Nominal width: 100 to 600 mm
- Overall width: Nominal width + 11 mm
- Standard angle: 90°
- Radius: 300 mm
- Material thickness: 3 mm
- Standard material: Carbon steel
- Surface finish: Hot dip galvanized according to NEN-EN-ISO 1461
- Zinc coating thickness: 60 to 70 µm
- Execution: With integrated connectors, including 6x ESL-SB M10x20 fixing set (carriage bolt M10x20, nut, and washer)
- Connection method: Bolted
- Standards: IEC 61537, suitable for installations in accordance with NEN 1010
Typical Applications
- 90° branch connections within cable ladder systems
- Distribution of main cable routes into branch routes
- Industrial installations
- Commercial buildings
- Data centres and technical facilities
- Infrastructure projects
Available Material Variants
- HDG: Hot dip galvanized carbon steel according to NEN-EN-ISO 1461, with a zinc coating thickness of 60 to 70 µm, suitable for industrial and outdoor environments.
- Stainless Steel 304 (A2 / 1.4301): Suitable for indoor environments and lightly corrosive conditions.
- Stainless Steel 316L (A4 / 1.4404): Provides enhanced corrosion resistance for chemical, marine, offshore, and aggressive environments.
- RAL: RAL powder-coated carbon steel, available on request for project-specific applications.
Complementary Products
For a complete installation within the ECL60 system, the following components are available:
- Cable ladders: ECL60 cable ladders in various widths and lengths.
- Couplers: For longitudinal cable ladder connections.
- Other fittings: Horizontal and vertical bends, crosses, inside risers, outside risers, and reducers.
- Support systems: Wall brackets, ceiling brackets, trapeze hangers, and strut channels.
- Fixing materials: ESL-SB bolt sets and other mounting accessories.
These components ensure a safe, fully compatible, and maintenance-friendly cable support installation.
Other widths, radii, and angles are available on request.
Eurostrut_EET60_T-Piece for Cable Ladder ECL_SAT.zip
