Skip to main content

Variations

Product number
For pipe diameter
Number of pipes
For pipe diameter:
12 - 32 mm
Number of pipes:
3
Product number
For pipe diameter:
13 - 32 mm
Number of pipes:
4
Product number
For pipe diameter:
30 - 49 mm
Number of pipes:
3
Product number
For pipe diameter:
45 - 67 mm
Number of pipes:
3
Product number
For pipe diameter:
30 - 49 mm
Number of pipes:
4

Product information

Suitable for pipe diameter : 45 - 67 mm
Closed : Yes
Material : Plastic
Material quality : Polyamide (PA)
Surface protection : Untreated
Connectable : Yes
Max. number of tubes : 3
Type of fastening : Screw hole
With inlay : No
With wall gasket : No
Colour : Black
Working temperature : -80 - 120 °C
Halogen free : Yes

Single blocks that function as both lower and upper halves. For the installation of 3 single- and multi-core cables with an outer diameter of 45-67mm. Fixing materiaal (2x M12X195 threaded rod 4x bolts M12 and 4x nuts M12) not included.

Application: Suitable for the installation of multiple single- and multi-core low-, medium- and high-voltage cables positioned side by side or stacked in layers, with an outer diameter ranging from 13 mm to 67 mm.

Design: The UNI block consists of a single component that functions as both the lower and upper shell. It is designed to allow easy installation of cables in a flat configuration, with multiple cables placed next to each other and/or stacked on top of one another. A minimum of two blocks is required to clamp one layer of cables.

Tightening torque for the fastening material: 5 – 8 Nm
(depending on the specifications of the cable manufacturer).

Advantages:

  • Resistant to oils, greases, frost, heat, UV, ozone, salt water, salts, acids and aggressive chemicals.
  • No oxidation or corrosion.
  • Non-magnetic and non-conductive.
  • Halogen-free and no sharp edges.
  • Flame-retardant V-0 (UL94).
  • Temperature range from -80 °C to 120 °C (220 °C short-term).
  • Lifetime warranty.
  • Easy installation.
  • Available worldwide.