Outside Riser 45° Cable Tray ECT100 100x200 SS304

Product number: ECTOR100-200-45-SS304
Brand: Eurostrut
Check icon
Fast delivery
Check icon
20 years of expertise and experience
Check icon
Own brand of high quality
Phone icon Need help? Call us +31 10 522 33 51
Material quality
Suitable for cable tray width
Bekijk alle varianten

Variations

Product number
ECTOR100-100-45-HDG
Material quality
Angle
Suitable for cable tray height
For tray width
Material quality:
Hot dip galvanized
Angle:
45°
Suitable for cable tray height:
100 mm
For tray width:
100 mm
Product number
ECTOR100-150-45-HDG
Material quality:
Hot dip galvanized
Angle:
45°
Suitable for cable tray height:
100 mm
For tray width:
150 mm
Product number
ECTOR100-200-45-HDG
Material quality:
Hot dip galvanized
Angle:
45°
Suitable for cable tray height:
100 mm
For tray width:
200 mm
Product number
ECTOR100-300-45-HDG
Material quality:
Hot dip galvanized
Angle:
45°
Suitable for cable tray height:
100 mm
For tray width:
300 mm
Product number
ECTOR100-400-45-HDG
Material quality:
Hot dip galvanized
Angle:
45°
Suitable for cable tray height:
100 mm
For tray width:
400 mm
Product number
ECTOR100-500-45-HDG
Material quality:
Hot dip galvanized
Angle:
45°
Suitable for cable tray height:
100 mm
For tray width:
500 mm
Product number
ECTOR100-600-45-HDG
Material quality:
Hot dip galvanized
Angle:
45°
Suitable for cable tray height:
100 mm
For tray width:
600 mm
Product number
ECTOR100-100-45-SS316
Material quality
Angle
Suitable for cable tray height
For tray width
Material quality:
Stainless Steel 316
Angle:
45°
Suitable for cable tray height:
100 mm
For tray width:
100 mm
Product number
ECTOR100-150-45-SS316
Material quality:
Stainless Steel 316
Angle:
45°
Suitable for cable tray height:
100 mm
For tray width:
150 mm
Product number
ECTOR100-200-45-SS316
Material quality:
Stainless Steel 316
Angle:
45°
Suitable for cable tray height:
100 mm
For tray width:
200 mm
Product number
ECTOR100-300-45-SS316
Material quality:
Stainless Steel 316
Angle:
45°
Suitable for cable tray height:
100 mm
For tray width:
300 mm
Product number
ECTOR100-400-45-SS316
Material quality:
Stainless Steel 316
Angle:
45°
Suitable for cable tray height:
100 mm
For tray width:
400 mm
Product number
ECTOR100-500-45-SS316
Material quality:
Stainless Steel 316
Angle:
45°
Suitable for cable tray height:
100 mm
For tray width:
500 mm
Product number
ECTOR100-600-45-SS316
Material quality:
Stainless Steel 316
Angle:
45°
Suitable for cable tray height:
100 mm
For tray width:
600 mm
Product number
ECTOR100-100-45-SS304
Material quality
Angle
Suitable for cable tray height
For tray width
Material quality:
Stainless Steel 304
Angle:
45°
Suitable for cable tray height:
100 mm
For tray width:
100 mm
Product number
ECTOR100-150-45-SS304
Material quality:
Stainless Steel 304
Angle:
45°
Suitable for cable tray height:
100 mm
For tray width:
150 mm
Product number
ECTOR100-200-45-SS304
Material quality:
Stainless Steel 304
Angle:
45°
Suitable for cable tray height:
100 mm
For tray width:
200 mm
Product number
ECTOR100-300-45-SS304
Material quality:
Stainless Steel 304
Angle:
45°
Suitable for cable tray height:
100 mm
For tray width:
300 mm
Product number
ECTOR100-400-45-SS304
Material quality:
Stainless Steel 304
Angle:
45°
Suitable for cable tray height:
100 mm
For tray width:
400 mm
Product number
ECTOR100-500-45-SS304
Material quality:
Stainless Steel 304
Angle:
45°
Suitable for cable tray height:
100 mm
For tray width:
500 mm
Product number
ECTOR100-600-45-SS304
Material quality:
Stainless Steel 304
Angle:
45°
Suitable for cable tray height:
100 mm
For tray width:
600 mm
Product number
ECTOR100-100-45-PG
Material quality
Angle
Suitable for cable tray height
For tray width
Material quality:
Pre galvanized
Angle:
45°
Suitable for cable tray height:
100 mm
For tray width:
100 mm
Product number
ECTOR100-150-45-PG
Material quality:
Pre galvanized
Angle:
45°
Suitable for cable tray height:
100 mm
For tray width:
150 mm
Product number
ECTOR100-200-45-PG
Material quality:
Pre galvanized
Angle:
45°
Suitable for cable tray height:
100 mm
For tray width:
200 mm
Product number
ECTOR100-300-45-PG
Material quality:
Pre galvanized
Angle:
45°
Suitable for cable tray height:
100 mm
For tray width:
300 mm
Product number
ECTOR100-400-45-PG
Material quality:
Pre galvanized
Angle:
45°
Suitable for cable tray height:
100 mm
For tray width:
400 mm
Product number
ECTOR100-500-45-PG
Material quality:
Pre galvanized
Angle:
45°
Suitable for cable tray height:
100 mm
For tray width:
500 mm
Product number
ECTOR100-600-45-PG
Material quality:
Pre galvanized
Angle:
45°
Suitable for cable tray height:
100 mm
For tray width:
600 mm

Product information

Change of direction : Vertically descending
Angle : 45°
Construction type : Bend rigid
Bend model : Segmental bend
For connection with screws : Yes
For screwless connection : No
With cover : No
Inner radius : 50 mm
Suitable for cable tray height : 100 mm
Suitable for cable tray width : 200 mm
Material thickness : 1 mm
Side perforation : No
Bottom perforation : Yes
Model : Integrated connector
Material : Stainless steel
Material quality : Rustproof and acidproof steel
Colour : Stainless steel
Outside Riser 45° Cable Tray ECT100 100x200 SS304 with sizes H=100mm, W=200mm, E (thickness)=1,0mm, 45°, stainless steel 304, including 16x EFS08x15-304 Eurostrut fixing set (bolt M08x15, nut and washer).

Outside riser ECTOR100-45 is an accessory for the ECT100 cable tray system and is used to create a vertical downward change in direction within cable routes. The 45° outside riser enables a controlled downward transition, allowing height differences in the cable route to be bridged gradually without excessive bending stress on the cabling. This accessory is suitable for heavy industrial, utility, and infrastructure installations.

The standard version is manufactured from hot dip galvanized carbon steel according to NEN-EN-ISO 1461, with a minimum zinc coating thickness of 60 µm, suitable for heavy industrial and outdoor environments. The hot dip galvanizing process is applied after fabrication and provides full protection of the surface, including cut edges and fixing holes. This makes the accessory suitable for applications with increased corrosive and mechanical loads, in accordance with IEC 61537 and installations compliant with NEN 1010.

The outside riser is designed as a fixed vertical fitting with a 45° angle and a standard radius of 50 mm. The execution is equipped with integrated connectors and is supplied including 16x EFS08x15 fixing set (carriage bolt M08x15, nut, and washer), enabling fast and alignment-stable installation. The accessory is fully compatible with other ECT100 system components and ensures a uniform and mechanically stable cable tray installation.

Technical Specifications

  • Product type: Outside riser for cable tray
  • System: ECT100
  • System height: 100 mm
  • System width: 100 to 600 mm
  • Material thickness: 1.0 to 1.5 mm
  • Angle: 45°
  • Radius: 50 mm
  • Connector perforation: 25 x 8.5 mm
  • Bottom perforation: 25 x 8.5 mm
  • Material: Carbon steel
  • Surface finish: Hot dip galvanized according to NEN-EN-ISO 1461
  • Zinc coating thickness: minimum 60 µm
  • Connection method: Bolted
  • Execution: With integrated connectors, including 16x EFS08x15 fixing set (carriage bolt M08x15, nut, and washer)
  • Standards: IEC 61537, applicable within installations compliant with NEN 1010
  • Direction change: Vertical downward
  • Construction type: Outside riser
  • Top cover: No
  • Side perforation: No
  • Bottom perforation: Yes

Typical Applications

  • Vertical downward changes in cable tray systems
  • Bridging height differences in cable routes
  • Heavy industrial and outdoor installations
  • Utility and infrastructure cable routes

Available Material Variants

  • HDG: Hot dip galvanized carbon steel according to NEN-EN-ISO 1461, with a minimum zinc coating thickness of 90 µm, suitable for heavy industrial and outdoor environments.
  • PG: Pre galvanized carbon steel according to EN 10346, suitable for dry indoor environments and light industrial applications.
  • Stainless steel 304 (A2 / 1.4301): Stainless steel for indoor environments and lightly corrosive conditions.
  • Stainless steel 316 (A4 / 1.4404): Stainless steel with enhanced corrosion resistance for chemical, maritime, and offshore applications.

Complementary Products

For a complete installation within the ECT100 system, the following components are relevant:

  • Cable trays: ECT100 cable trays in various widths
  • Couplers: For longitudinal connections
  • Inside risers: For vertical upward transitions
  • Brackets: Wall, ceiling, and trapeze brackets
  • Covers and clamps: For protection and fixation

These components together ensure a safe, compatible, and maintenance-friendly installation.

Other widths, radii and angles available on request.

Cookie preferences
This website uses cookies and similar technologies to enhance your user experience. Cookies help us ensure the website functions optimally, perform analyses, and tailor content and advertisements to your interests. Additionally, cookies help us understand how visitors use the site, so we can improve it and offer more relevant information.