Inside Riser 90° Cable Tray ECT60 600mm HDG
Want to view our prices?
Our pricing is exclusively available to registered customers.
Variations
Product information
| Change of direction : | Vertically rising |
|---|---|
| Angle : | 90° |
| Construction type : | Bend rigid |
| Bend model : | Segmental bend |
| Suitable for connection with screws : | Yes |
| Suitable for screwless connection : | No |
| With cover : | No |
| Inner radius : | 50 mm |
| Suitable for cable tray height : | 60 mm |
| Suitable for cable tray width : | 600 mm |
| Material thickness : | 1.5 mm |
| Side perforation : | No |
| Bottom perforation : | Yes |
| NATO-mounting holes : | No |
| Model : | Integrated connector |
| Suitable for circuit integrity : | No |
| Material : | Steel |
| Material quality : | Rustproof and acidproof steel |
| Surface protection : | Hot-dip galvanised |
| Colour : | Zinc |
Inside Riser 90° for cable tray ECT60 with sizes H = 60mm, W = 595 mm, E (thickness) = 1.5 mm, 90°, carbon steel, hot dip galvanized according to NEN-EN-ISO 1461, minimum layer thickness 60 µm, including 8x EFS08x15-GEO Eurostrut fixing set (bolt M8x15, nut and washer).
Inside riser ECTIR60 is an accessory for the ECT60 cable tray system and is used to create a vertical change of direction within cable routes. The 90° inside riser enables a right-angle transition from a horizontal to a vertical cable tray section, allowing cables to be guided in a controlled manner without excessive mechanical stress. This accessory is suitable for heavy industrial, utility, and infrastructure installations.
The standard version is manufactured from hot dip galvanized carbon steel according to NEN-EN-ISO 1461, with a minimum coating thickness of 60 µm, suitable for heavy industrial and outdoor environments. The hot dip galvanizing process is applied after fabrication and provides full corrosion protection of the surface, including cut edges and fixing holes. This makes the accessory suitable for applications with increased mechanical and environmental loads, in accordance with IEC 61537 and installations compliant with NEN 1010.
The inside riser is designed as a fixed accessory with a 90° angle and is intended for direct connection to straight ECT60 cable trays. The execution is equipped with integrated connectors and is supplied including fixing material, enabling fast and alignment-stable installation. The accessory is fully compatible with other ECT60 components and contributes to a stable and uniform cable route.
Technical Specifications
- Product type: Accessory – inside riser for cable tray
- System: ECT60
- System height: 60 mm
- System width: 75 to 600 mm
- Angle: 90°
- Execution: With integrated connectors, including 8x EFS08x15 fixing set (bolt M08x15, nut and washer)
- Standard material: Carbon steel
- Surface finish: Hot dip galvanized according to NEN-EN-ISO 1461
- Zinc coating thickness: minimum 60 µm
- Standards: IEC 61537, applicable within installations compliant with NEN 1010
Typical Applications
- Vertical right-angle changes of direction using inside risers in ECT60 cable tray systems
- Transitions from horizontal to vertical cable routes
- Heavy industrial installations
- Utility and infrastructure cable routes
Available Material Variants
- HDG: Hot dip galvanized carbon steel according to NEN-EN-ISO 1461, with a minimum coating thickness of 60 µm, suitable for heavy industrial and outdoor environments.
- PG: Pre galvanized carbon steel according to EN 10346, suitable for dry indoor environments and light industrial applications.
- Stainless steel 304 (A2 / 1.4301): Stainless steel for indoor environments and lightly corrosive conditions.
- Stainless steel 316 (A4 / 1.4404): Stainless steel with enhanced corrosion resistance for chemical, maritime, and offshore applications.
Complementary Products
For a complete installation, Eurostrut offers various accessories, such as:
- Straight cable trays: ECT60 cable trays in various widths
- Other accessories: Bends, outside risers, T-pieces, and cross pieces for ECT60 systems
- Couplers: Coupling plates and bolt sets for ECT60 cable trays
These components ensure a safe, compatible, and maintenance-friendly installation.
Other widths and angles available on request.
Eurostrut_ECTIR60-90_Inside Riser 90.rfa
